EN
1. High efficiency, the screw and nut are pre-assembled on the left side of the assembly head, and then sent to the assembly head through the high-speed transfer mechanism, which improves the efficiency. It is 2 times more than its peers.
2. High precision, the depth of penetration of each tuning screw can be set, and the actual depth is measured by a laser type distance sensor.
3. Both the screw rod and the nut sleeve are floating mechanisms, which minimize the impact on the coating. There is no plating floating, which prevents the screws from falling and the cover surface will not be scratched.
4. Supported on the periphery and below, the cover will not bend and deform, and the screws will not be damaged. When the rod is lowered and passed through the screw, only the 3N compression spring acts on the cover. When the lock is raised, it automatically detects whether the batch and the screw slot of the screw are stuck to prevent the batch from pulling (pressing) the cover, bent rod, or broken rod .
5. Through simple modification, M4, M5 or other specifications can be used.
6. Easy model change.
7. Can adapt to certain hole position deviation.
8. Import the screw path using a DXF file.
| Efficiency | 2.1 ~ 2.7 seconds / piece, average 2.3 seconds / piece (screw depth 2 ~ 12) | Cover size | Max L420 × W420, small products can put multiple pieces at once |
| Positioning accuracy | ± 0.02mm | Insertion depth accuracy | ± 0.08mm (excluding screw length deviation) |
| Torque | 2.5 ~ 13Kgf.cm | Covering area | L1200 × W1200mm |
| Minimum screw pitch | 6.8mm | Model switching time | 5min |
| Number of screw pools | 8 |
Quick automatic assembly of cavity filter cover M3 tuning screw and nut. Assemble tuning screws of different length specifications to the specified hole position, and then tighten the nut after setting the depth to the set depth.
+86-755-89221301
